Type-C PD Product Portfolio

by

Kingpex offers total platform solution with customized power design services.

Our comprehensive Type-C PD controller list is as following:

Source Controller:

  • PD3.0 PPS CY2332 Download Datasheet
  • PD3.0+QC (27W) AXQ9603 w/ AEC-Q100 Automotive Qualified Download Datasheet
  • PD3.1 SPR/EPR AVS 28V CY2332H
  • PD3.1 SPR/EPR AVS 36V
  • PD3.2 PPS + QC3.0 Dual port (Type-C + Type-A) AXQ9605 w/ AEC-Q100 Automotive Qualified

Single chip (Buck + Source integrated):

  • PD3.1 SPR/EPR AVS 28V AXQ9504 w/ AEC-Q100 Automotive Qualified

Sink Controller:

  • PD3.0 PPS CY2569 Download Datasheet
  • PD3.0 PPS I2C CY2570
  • PD3.1 SPR/EPR 28V CY33771C
  • PD3.1 SPR/EPR I2C 28V CY33772S

Dual-Role Power (DRP): 下行供電、上行受電

  • PD3.1 SPR/EPR 36V CY53781
  • PD3.1 SPR/EPR I2C 36V CY53782

Alternate Mode (Alt-Mode) – DFP PD Charging + UFP Video/Data: 下行供電、上行影像數據

  • PD3.1 1-ch CY43781
  • PD3.1 2-ch CY43785

In-Vehicle Infotainment (IVI): 車用

  • CY2336Q

更多產品資訊或申請Demo board，請與我們聯繫！

AP66300 60V, 3A Synchronous Buck Converters

by

瑞達科技致力於推動高效Power IC，目前降壓IC範圍可涵蓋從低壓電池到60V 中壓系統；近期我們推出美商Diodes AP66300 60V 同步高效率降壓IC， 周邊電路相當精簡，IC本身功能選擇相當豐富，我們並支持Total solution，協助系統廠工程師快速完成產品設計，推出市場。

AP66300主要特色：

Wide 3.8V to 60V Input Voltage Range

  • Works across the full supply rails of commercial, industrial, and automotive applications

Programmable FSW 300kHz to 2.5MHz with clock synchronization

  • Low frequency from 300kHz – high-efficiency solution
  • High frequency to 2.5MHz – small-form factor solution

Low Quiescent Current (IQ) and Shutdown Current

  • 43μA IQ
  • 2.2μA shutdown current

Selectable Operation Modes: PFM/PWM

  • Pulse frequency modulation (PFM) increases light load efficiency
  • Pulse width modulation (PWM) supports low output voltage ripple

Tight V REF Tolerance

  • ± 1% across industrial temperatures

VOUT Adjustable from 0.8V to 50V

  • Suitable for variety of applications  

Green U-QFN4040-16/SWP (Type UXB) package

  • Small-form factor solution

更多產品資訊或申請Demo board，請與我們聯繫！

New Generation & High-Performance USB PD3.0 / PPS / QC4 / 4+ Controller

by

全球首批通過 USB-IF PD3.0 認證的Canyon CY2332 USB Type-C PD控制晶片，為一周邊零件極精簡且具有整體成本優勢的高度整合解決方案，可支援電源供應端應用之USB PD 3.0規格以及USB PD最新的Programmable Power Supply(PPS)規格，最高支援到100W (20V/5A)，同時也支援自動辨識Qualcomm QC4.0/ QC3.0/ QC2.0 以及Apple 與BC1.2 等快充協議。

CY2332 提供強大的保護方案，內置OVP/OCP/SCP/OTP特性，相當適用於各種行動裝置快充周邊應用，如：AC Adapter充電器、Car Charger與Power UPS等。並與Diodes Incorporated合作推出 PD3.0 57W AC/DC-Dual-Port Reference design，以及Car Charger (DC/DC+PD3.0) total solution。

USB PD充電器 / 車充模組

CY2332 / AN6572 / AN6575，提供高度整合的USB Type-C 充電器應用。

CY2332主要電路特色:

  • Compatible with USB PD Rev 3.0 V1.2
  • USB-IF PD3.0/PPS Certificated TID = 1090028 and 78
  • Qualcomm QC4/4+ Protocol Certificated
  • OTP (One-Time-Programmable) for Main Firmware
  • MTP (Multi-Time-Programmable ) for System Configuration
  • Built-In Regulator for CV and CC Control
  • Support SCP/OTP/OVP/UVP with Auto Restart
  • Support Power Saving Mode
  • External N-MOSFET Control for VBUS Power Delivery
  • Support e-Marker Cable Detection
  • Operating Voltage Range: 3.3V to 20V
  • Fewest External Component Count
  • Totally Lead-Free & Fully RoHS Compliant
  • Halogen and Antimony Free. “Green” Device
  • Package: W-DFN3030-14/W-QFN4040-24

更多產品資訊或申請Demo board，請與我們聯繫！

15W Qi Standard Wireless Charging Solutions

by

15W Qi「氣」無線充電TX(GPM8F8008C)、RX(GPMQ9103A)方案

WPC Qi 標準是目前市場主流的無線充電標準，利用線圈與線圈感應產生電流，做能量轉移的動作。近期各家手機品牌發布新款智慧型手機大多加入符合Qi標準規格的無線充電功能，無線充電趨勢已經確立，也將加速成為智慧型手機的標配，更加帶動無線充電在生活中更寬廣的應用！

無線電力傳輸為充電裝置提升了使用的便利性，當然標準化的設計與充電規範就成為產品開發的選擇重點。瑞達科技推出Generalplus符合WPC最新Qi標準(Qi 1.2.3) 15W 無線充電發射端（TX）GPM8F8008C，以及接收端（RX）GPMQ9103A參考設計之完整解決方案，可支援Fast Charge/Apple 7.5W/Qi 15W/Qi 5W，兼容性大、應用廣泛，如手機周邊、穿戴式裝置等，歡迎洽詢！

15W TX Solution – GPM8F8008C
15W RX Solution – GPMQ9103A

Product features :

All of our wireless-charger solutions are optimized for Extended Power Profile (EPP) with Wireless Power Consortium (WPC) Qi 1.2 certified applications up to 15W. Our product portfolio covers a wide range of charging applications, such as mobile device applications and wearable applications .

  • Rich roadmap: Complete low/middle/high-end products
  • Highly integrated solution: Power components embedded
  • High cost-performance ratio: Higher quality but lower price
  • Great service: Support customized products tailored to specific needs and offer consultations for certification and layout
  • Total solution: Support total BOM solution including the coils

5W~30W AC/DC Small Form Factor Solution – IN2PY16

by

The IN2PY16 is an excellent primary side feedback converter for 5W to 30W low power AC/DC offline SMPS applications. It can meet the Energy-Star® specification for AC/DC single output power supplies with no-load power consumption less than 100mW. 

It provides constant voltage (CV), constant current (CC) and cable compensation for CV regulation.

Besides, the IN2PY16 series is built-in the VDD over-voltage protection and FB pins to prevent the circuit being damaged from the abnormal conditions.

It minimizes the components counts and make it an ideal design for low cost applications, such as phone charger, low power adapter and tablet PC.

Application Circuit

For more product information or apply for sample, feel free to contact us !

AC/DC Buck Converter for IoT power – AL17050

by

The AL17050 is a universal high voltage AC/DC step down regulator suitable for IoT power applications with very low standby power. Working with a single winding inductor and integrated 500V MOSFET, it can use fewer external components and create a low BOM cost solution. The AL17050 achieves excellent regulation and high power efficiency through variable switching frequency as load changes. Typical applications are offline low power applications including home appliance applications and IoT applications.

Features :

– A wide range of input voltage from 90 Vac to 264 Vac
– Very low standby power : Operation current 100μA (Static)
– Rich protection features, such as OTP, OSP, OLP, UVLO and OLD
– Internal MOSFET up to 500V
– Available in the TSOT25 package.

Typical Applications Circuit

For more product information, please contact us !

支援7大協定，USB-IF 認證 USB PD3.0 Fast Charging Protocol IC – FP6606

by

天鈺FP6606在USB-IF Compliance Workshop上成功通過了所有的兼容性測試項目，並於2018年11月26日正式獲得協會的USB PD3​​.0認證。通過USB-IF協會官網可查詢到，天鈺FP6606的USB PD3​​.0認證TID號為302。

天鈺FP6606是一顆高度整合的USB PD3.0協定晶片，目前主推CPC-16L (P6) 封裝方式，除了支援USB PD3.0快充之外，天鈺FP6606亦支援QC4+、QC3.0、QC2.0、FCP、AFC、SCP、APPLE 2.4A以及BC1.2等主流的充電協議，相容性很強。可應用於多種規格之USB PD快充充電器、USB PD快充車充等產品中。

天鈺FP6606系列晶片還包括了高性價比的FP6606C、FP6606AC以及FP6606CM等多個型號，可滿足單Type-C口、多Type-C口以及Type-A+Type-C雙口的充電配件產品之應用需求，支援5V/ 9V/ 12V/ 15V以及專為筆記型電腦設計的20V輸出電壓，最大功率可達45W，形成了完整的USB PD快充晶片產品組合，為不同層次的充電器廠商提供了完整的快充解決方案。

更多產品資訊或申請Demo board，請與我們聯繫！

USB Type-C PD3.0/QC4.0 Power Adapter & Car Charger Solutions – CY2311/CY2312

by

全球首批通過 USB-IF PD3.0 認證的Canyon CY2311/CY2312 USB Type-C PD控制晶片，為一周邊零件極精簡且具有整體成本優勢的高度整合解決方案，可支援電源供應端應用之USB PD 3.0規格以及USB PD最新的Programmable Power Supply(PPS)規格，最高支援到100W (20V/5A)，同時也支援自動辨識Qualcomm QC4.0/ QC3.0/ QC2.0 以及Apple 與BC1.2 等快充協定，並有完整保護功能(OCP/SCP/OTP/UVP)，相當適用於行動裝置的各種快充周邊應用，如：AC Adapter充電器、Car Charger與Power Bank等。

目前已推出共四款 USB Type-C PD Controller (如下表)，並與 Diodes 合作推出 PD3.0 57W AC/DC-Dual-Port Reference design，以及Car Charger (DC/DC+PD3.0) total solution，更多產品資訊或申請Demo board，請與我們聯繫！

USB Type-C PD 產品列表：

Item P/NSpec. DescriptionPackage
CY2211USB PD2.0 with QC2.0 Controller TSSOP-16L /TSSOP-20L
CY2211-SUSB PD2.0 with QC3.0 ControllerTSSOP-16L /TSSOP-20L
CY2311USB PD3.0 with QC3.0 ControllerTSSOP-16L /TSSOP-20L
CY2312USB PD3.0/PPS with QC4.0 ControllerTSSOP-16L /TSSOP-20L

USB Type-C 逐漸成為行動裝置的主流接口類型。對於消費者來說，日後插入傳輸線就不必對準方向，而且無論是手機、平板、筆記型電腦都能用同一條線進行傳輸，相當方便。待USB Type-C PD規範普及後，還可以進一步提高行動裝置傳輸與充電的速度。對廠商來說，除了標準轉換期間產生的週邊配件商機外，尺寸較小的 Type-C 也能在產品設計時提供更多的變化空間。

更多產品訊息，請與我們聯繫！

PD3.0/PD2.0 Certificated USB Type-C 傳輸線 E-Marker 晶片 – CY2518

by

瑞達最新推出Canyon CY2518 是用於主動和被動Type-C傳輸線的「電子標記」(Electronic Marker, E-Marker) 晶片，已通過USB-IF協會PD3.0 / PD2.0 認證。若Type-C傳輸線要支援3A以上的供電能力時，必須有USB Type-C Electronically Marked來標記。帶有電子標記的傳輸線在傳輸過程中，可傳遞大量屬性資料並支援規格內的最大電壓／電流以及訊號頻率，將所有搭載 USB Type-C 的手機、平板電腦、電視及各式電子周邊產品全部連接在一起，讓 USB Type-C 的傳輸效能發揮到極致，成為真正「通用的」(Universal) 連接器。

CY2518 周邊無須外部零件，且封裝為WDFN-8 Pin 2×3 mm / 2×2 mm，可讓傳輸線廠商在設計Paddle Card時達到最小化，並達到成本極簡化。關於更多產品資訊或申請Demo board，請與我們聯繫！

參考應用線路:

USB Type-C PD Sink Controller – CY2568

by

USB Type-C 不僅支援更快的速度，更有助於製造商打造更輕薄的工業設計產品，同時具有極為強大的可擴充性，使得其應用愈來愈廣泛。瑞達已推出Canyon USB Type-C PD 2.0/3.0/PPS Sink Controller CY2568，採用Max. 32V高壓製程，CY2568 內建5V/1.8V LDOs，提供Type-C receptacle 板端母座最精簡low cost的解決方案。CY2568 可透過I2C與CC channel 作編程，其PDO可自動設定或由GPIOs作設定，且工作電流很低。